News:



  • March 29, 2024, 09:55:18 AM

Login with username, password and session length

Author Topic: Fine thread NVA for TD 049  (Read 800 times)

Offline Lyle Spiegel

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 505
  • Welcome to the Stunt Hanger.
Fine thread NVA for TD 049
« on: February 08, 2019, 08:30:43 PM »
Are the fine thread NVA ( Kustom Kraftmanship) style for TD 049 still available? If not, what other options can be used to rinse pressure setup? Thx
Lyle Spiegel AMA 19775

Offline Fredvon4

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2099
  • Central Texas
Re: Fine thread NVA for TD 049
« Reply #1 on: February 09, 2019, 12:57:18 PM »
Lyle....mostly private and e-bay only sales any more...no longer produced by any one...well I take that back..I think Matt at ExModel Engines has a variant...If I recall his are 80-TPI and not 128TPI...test by CEF members was favorable

ask Matt at
http://www.exmodelengines.com/product.php?productid=18311&cat=266&page=1


On the Bay I have seen them bid up to over $100...insane

Texas Timers is out... no more ever
ACE R/C version-- long gone, but occasionally can be seen a a engine or LOT of engines...generally a gold(brass ) Body with a tightening nut over the needle...KK versions usually had the hard black plastic over the needle

I am down to one KK and one Ace RC version...not really wanting to part with either

But would consider a serious offer

One other option is to convert to a remote NVA for pressure... the smaller OS 10/15 
PN-21181902 works but Tower and Shttrman  ( E Bay seller) do not have any
"A good scare teaches more than good advice"

Fred von Gortler IV

Offline Mark Mc

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 718
Re: Fine thread NVA for TD 049
« Reply #2 on: February 09, 2019, 02:35:30 PM »
As Fred said, eBay or classifieds on the various modelling boards.  I have taken a Cox fine needle assembly from a postage stamp backplate and pressed it into the EX Models assembly that Matt is currently selling, and it works the same as the old KK/Ace/Texas Timers assemblies.  Retrofitting a fine NVA in a TD also came up a while back on the CEF board where someone posted an old article on converting the standard TD NVA to fine thread:  https://www.coxengineforum.com/t11875-fine-thread-nv-assembly-for-a-td


Mark

Offline Mark Mc

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 718
Re: Fine thread NVA for TD 049
« Reply #3 on: February 09, 2019, 02:35:57 PM »
Double posted by mistake.


Mark


Advertise Here
Tags:
 


Advertise Here