stunthanger.com

Speed,Combat,Scale,Racing => Speed Talk => Topic started by: Ken Burdick on November 17, 2016, 01:29:23 PM

Title: D speed spinner needed
Post by: Ken Burdick on November 17, 2016, 01:29:23 PM

Guys. I'm looking for a D spinner assembly (1/12") to adapt to a D speed project. An OPS would adapt ok. The length of the end of hub to back of spinner back is .65 or thereabouts so it can be machined to correct fit in pan

Thanks

Ken

Title: Re: D speed spinner needed
Post by: Motorman on November 18, 2016, 07:20:22 AM

If you want to make your own back plate or somehow key it to the drive washer you can look on eBay for an aluminum "Miracle spinner". I think the same company in China makes an 1-1/2" carbon fiber spinner too. I have both on a Fox speed and a Perky and they are well made.

http://www.ebay.com/itm/Miracle-High-Quality-Aluminum-Spinner-1-50-2-Blades-Super-Light-Series-/302136816709?hash=item4658c1f445:g:TbAAAOSwXyVYJ8Q7

MM

Title: Re: D speed spinner needed
Post by: Ken Burdick on November 18, 2016, 10:37:56 AM

thanks. It's not exactly what I am looking for put the cone will be okay.


K

Title: Re: D speed spinner needed
Post by: Dick Tyndall on November 19, 2016, 08:54:45 PM

Ken,
    I have a new in the pack spinner cone for an O.S. Max 65RSR. Don't have the drive plate for it, though. Have a spinner drive plate for a Super Tigre .29, but it is 1/8" smaller diameter than the 65 . Also have ( 3 ) NVA's for the O.S. Max 65RSR if you're looking. Maybe check with Billy Hughes about an OPS spinner for a 65 engine.

Title: Re: D speed spinner needed
Post by: Ken Burdick on November 20, 2016, 03:22:56 PM

Thanks for the reply Dick. I am trying to find Dick Heart as he bought all George Browns spinners. They are really nice. I checked with Bill H first but he had no parts. It's an interesting engine and hopefully will be a good runner.

Thanks again.

Ken