stunthanger.com

Speed,Combat,Scale,Racing => Speed Talk => Topic started by: Robert Bolton on April 10, 2007, 03:27:18 PM

Title: Converting 2 line sidewinder model too Monoline
Post by: Robert Bolton on April 10, 2007, 03:27:18 PM

I have a 29 and a 61 powered sidewinder models both in 2 line configuration and would like to convert them to Monoline. Is there a preferred way? Any Ideas Pictures or Diagrams would be much appreciated

Thanks in Advance
Robert Bolton

PS This monoline flying has become addictive  #^

Title: Re: Converting 2 line sidewinder model too Monoline
Post by: Joey Mathison 9806 on April 10, 2007, 04:43:20 PM

Robert I think Billy Hughes has some pics of the tourque rod he is by far a great one to get this advise from the ships i use that he made we perfict groovers and that is very important.

Title: Re: Converting 2 line sidewinder model too Monoline
Post by: Bill Hughes on April 10, 2007, 05:44:28 PM

Robert,
Check out these pitcures. If you have questions, send me an email... williamhughes4@comcast.net

Title: Re: Converting 2 line sidewinder model too Monoline
Post by: Bill Hughes on April 10, 2007, 05:46:45 PM

More pictures..... The Wire is the same dia as the flying wire or .002" larger. The Torque Rod is .062-.080 dia.
Bill

Title: Re: Converting 2 line sidewinder model too Monoline
Post by: Robert Bolton on April 10, 2007, 06:38:16 PM

Bill thankyou for your fast reply and pics! For me a picture is worth a thousand words so they have answered many questions. If I get stuck I will Email.

Thanks Again
Robert Bolton

Title: Re: Converting 2 line sidewinder model too Monoline
Post by: Joey Mathison 9806 on April 10, 2007, 09:53:57 PM

 :## #^ #^ #^ :## thanks Bill