News:



  • April 23, 2024, 01:16:27 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Bellcrank for Perky  (Read 1115 times)

Online Chris Sarnowski

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 48
Bellcrank for Perky
« on: July 22, 2018, 05:29:50 PM »
Hi Guys,

What type of bellcrank should I be using on a Perky? I am likely using a Fox 15 BB Schnuerle, although that plan might change.

I have Sig nylon 3" bellcranks, some used/recycled F2D bellcranks, and I think I have a few aluminum ones around.

Thanks
Chris
 
Logged

Online Chris Sarnowski

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 48
Re: Bellcrank for Perky
« Reply #1 on: July 23, 2018, 10:20:15 AM »
Thanks MM, the measurements would be helpful. How much elevator throw should the Perky have?

-Chris
Logged

Online jfv

  • 24 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 634
Re: Bellcrank for Perky
« Reply #2 on: July 23, 2018, 12:57:15 PM »
I use a Brodak 2 inch nylon.  Had some issues with metal bellcranks wearing due to harmonics.  Running a high RPM Super Fora.  No issues with the nylon crank.  Use inner hole.   1/4 inch up and down is plenty of control.
Logged
Jim Vigani

Online Chris Sarnowski

  • Trade Count: (0)
  • Ensign
  • **
  • Posts: 48
Re: Bellcrank for Perky
« Reply #3 on: July 24, 2018, 06:31:56 PM »
Thanks Jim, good info! Hope to have it done this fall.

-Chris
Logged

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here