stunthanger.com

Speed,Combat,Scale,Racing => Speed Talk => Topic started by: bob whitney on June 18, 2019, 11:48:53 PM

Title: 21 profile proto
Post by: bob whitney on June 18, 2019, 11:48:53 PM

can the 21 profile proto have a clear finish trimmed in color

Title: Re: 21 profile proto
Post by: Bob Heywood on June 19, 2019, 06:08:54 AM

Yes.

Glen Van Sant's speedster...

Title: Re: 21 profile proto
Post by: bob whitney on June 21, 2019, 08:51:52 AM

meant to ask about the 1/2a proto also

Title: Re: 21 profile proto
Post by: Bob Heywood on June 22, 2019, 06:09:18 AM

Quote from: bob whitney on June 21, 2019, 08:51:52 AM

meant to ask about the 1/2a proto also

No.

19.1.
Design of 1/2A Proto Speed Model. Proto Speed models need not be scale; however, the design must resemble that of a full scale airplane. Models must have a profile fuselage, rudder or butterfly tail, and a clear cockpit or cabin in proportion to the total model. No pod-and-boom fuselages, flush or prone cockpits, or flying-wing designs will be permitted unless they are scale models of full-scale aircraft. The complete model with the exception of the engine, tank, bellcrank and landing gear must be finished with an opaque paint. The model may also be colorfully trimmed. Clear or tinted finishes that show the color of the construction material are not allowed. Models must satisfy the Control Line General profile definition.