Author Topic: p-51 props and spinners (Read 502 times)

fernando torres · « **on:** September 03, 2011, 05:35:00 AM »

Where can I find 4 blade props and spinners for a p-51? With regard to spinners, the ones I have seen look" too pointy" not to scale.

John Rist · « **Reply #1 on:** September 03, 2011, 07:46:27 AM »

Tru-Turn has 4 bladed spinners, If you start with their home page go to spinners - shapes - size - etc. By the way they come in colors but they are anadized which is shinney. I suppect you will have to paint. They are aluminum so probbly will need priming.

http://www.truturn.com/cgi-bin/store/agora.cgi?p_id=tt25604b115:16&ppinc=spinners160&exact_match=on

APC makes 4 bladed props. What size P-51 are you building? Electric or gas?

roger · « **Reply #2 on:** September 03, 2011, 08:50:31 AM »

what i do ,because i dont fly with that , only for show, is buy 2 props the same make sure they are exactly the size you want. put it on a band saw and cut off around the hub , lay your other one out the two halfs will now make your 4 blader. rough up lay flat the areas to be epoxied togther stick um togther now get your spinner and cut to fit

bob whitney · « **Reply #3 on:** September 11, 2011, 11:17:11 AM »

what size engine and props are you using .with 4 blades you wont want much pitch .i made the carbon 4 blade props for my Pond racer also the carbon spinners . also made spinners for Keith Trostle and Leroy Blasck, Bob Whitney ( not Whitely).

Author Topic: p-51 props and spinners (Read 502 times)

fernando torres

p-51 props and spinners

John Rist

Re: p-51 props and spinners

roger

Re: p-51 props and spinners

bob whitney

Re: p-51 props and spinners