stunthanger.com

Vendors Corner => RSM => Topic started by: eric rule on July 20, 2012, 09:00:21 PM

Title: New Carbon Fibre Bell Cranks
Post by: eric rule on July 20, 2012, 09:00:21 PM

The machine shop finally delivered my 4" Carbon Fibre Bell Cranks.

They are CNC machined from commercial grade 1/8" thick carbon fibre sheet. This means there are no "voids" in the material that you often get with hand layered carbon fibre. The bushing is a high tech material similar to what is used in computer hard drives. It has a very low coefficient of friction so movement is silky smooth. We bush the line end holes with brass so that you do not have to bend tubing.

Cost is $19.99

Title: Re: New Carbon Fibre Bell Cranks
Post by: proparc on July 20, 2012, 10:24:47 PM

What are the dimensions?

Title: Re: New Carbon Fibre Bell Cranks
Post by: eric rule on July 27, 2012, 05:42:51 PM

Hi Milton;

The bell crank is 4" between the eyelets. Material is 1/8" thick commercial CF sheet.

Regards
Eric

Title: Re: New Carbon Fibre Bell Cranks
Post by: Bill Little on July 27, 2012, 06:25:15 PM

Looks good, Eric!

Thanks
Bill