News:


Advertise Here

  • July 27, 2021, 09:00:39 PM

Login with username, password and session length

Author Topic: New Carbon Fibre Bell Cranks  (Read 3852 times)

Offline eric rule

  • 2017
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 287
New Carbon Fibre Bell Cranks
« on: July 20, 2012, 09:00:21 PM »
The machine shop finally delivered my 4" Carbon Fibre Bell Cranks.

They are CNC machined from commercial grade 1/8" thick carbon fibre sheet. This means there are no "voids" in the material that you often get with hand layered carbon fibre. The bushing is a high tech material similar to what is used in computer hard drives. It has a very low coefficient of friction so movement is silky smooth. We bush the line end holes with brass so that you do not have to bend tubing.

Cost is $19.99

Offline proparc

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2388
Re: New Carbon Fibre Bell Cranks
« Reply #1 on: July 20, 2012, 10:24:47 PM »
What are the dimensions?
Milton "Proparc" Graham

Offline eric rule

  • 2017
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 287
Re: New Carbon Fibre Bell Cranks
« Reply #2 on: July 27, 2012, 05:42:51 PM »
Hi Milton;

The bell crank is 4" between the eyelets. Material is 1/8" thick commercial CF sheet.

Regards
Eric

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12786
  • Second in COMMAND
Re: New Carbon Fibre Bell Cranks
« Reply #3 on: July 27, 2012, 06:25:15 PM »
Looks good, Eric!

Thanks
Bill
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by


Advertise Here
Tags:
 


Advertise Here