Vendors Corner > RSM

CARBON FIBER PUSH ROD SYSTEM

(1/1)

eric rule:
New Push Rod system consisting of carbon fiber tube with Stainless Steel end fittings. Unlike end fittings that are inserted into the tube the new RSM fittings slide over the carbon fiber rod. Insert Carbon Fiber 5 mm tube into the stainless steel fitting and fix with JB Weld. No need to wrap with Kevlar Thread to keep rob from splitting. Put a Ball Link on the threaded portion and the Push Rod is ready to use. When used with the Push Rod End with right hand and left hand threads your new Push Rod can be shortened or lengthened by turning the rod. Once you have the perfect flap/elevator line up just run a jam nut up to the ball link and lock everything in place.


Part # CFTUBE . ..............  Price: $5.99


Push Rod Caps with 4-40 left hand threads. 

Part # PREND LH ............  Price: $5.99


Push Rod Caps with 4-40 right hand threads.

Part # PRENDRH ............  Price: $5.99


Push Rod System Components.

Carbon Fiber Tube 5.0 mm OD X 3.0 mm ID X 1 M. Pultruded carbon fiber hollow tube. Priced at only $0.16 per inch they are perfect for Push Rods. Match them up with RSM's exclusive Rod Caps (left and right hand threaded 4-40 ends) and Ball Links and you have a fully adjustable rush rod.


Push Rod System that is infinitely adjustable. Just turn the carbon fiber rod left or right to increase or decrease push rod length. System includes RSM 4" Carbon Fiber Bell Crank, Lead out wires, 5 mm Carbon Fiber push rod tube, Right hand and left hand threaded push rod ends and 1/8 Flap and Elevator Horns. Just add the ball links you like and your system is ready to install.

State distance from bell crank to flap horn and from flap horn to elevator horn when ordering.

Part # PRSYS ................  Price: $49.99

Navigation

[0] Message Index

Go to full version