News:

 

CLICK HERE--><--CLICK HERE

Unknown old racer: what is it?

Started by PerttiMe, March 21, 2023, 01:10:31 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

PerttiMe

Elsewhere, somebody is trying to identify an old Team Racer airframe. He thinks it is ".29 size".

Any ideas?

I built a Blue Pants as a kid. Wish I still had it. Might even learn to fly it.

Dave Hull

That's a tough one. Not one that I can find published anywhere. Maybe even a one-off from back in the day?

The closest one I can find would be the "Ghostly Counsellor" by R. Noble from 1951. Similar outlines but what would appear to be a higher A/R wing and a rounded vertical instead of the more rectilinear shape that you show.

Can you describe the decals? That might provide a clue. And, what country and likely model club are we talking about here?

If you find out, let us know!

bob whitney

rad racer

PerttiMe

The only additional photo that I have is from the other side.
It seems to be a kit because the wing ribs are marked in blue: R6, R5, etc.

The Challenger looks similar but wing construction does not match. https://outerzone.co.uk/plan_details.asp?ID=5504
The guy who has it thought it looks a bit like Keil Kraft Pacer but wing construction does not match there either. https://outerzone.co.uk/plan_details.asp?ID=1373

I have no clue what "Ghostly Counsellor" by R. Noble from 1951 is.
I built a Blue Pants as a kid. Wish I still had it. Might even learn to fly it.

Dave Hull

A bit of a look at the two mentioned so far. And good info on the rib markings indicating a kit. Maybe a modified something else, but likely much is in an original configuration...?

Dave Hull

And....

The thing that argued against it being the Challenger to me was the location of the canopy and the shape of the vertical. But those are things that are easily--almost inevitably--changed.

The Bobber may have it.

D

Dave Hull

Dave Shrum was building up a bunch of challengers a few years back. Here's a picture of that project.

bill bischoff

McDivot, I know we're looking at the same book, so look at the Mercury Mk I. The nose and flying surfaces look right, but the fuselage has obviously been changed to a bubble canopy. The book even says it was a Mercury kit!

Dave Hull

BB,

You've got a strong argument there! Here's the ancillary data that may help our poster:

Design by Johnny(sp?) Nunn of the Birmingham MAC in the U.K. from 1950
Kitted by Mercury
Wingspan: 24-1/2"
Wing Area: 125 sq. in.
Power: Frog 500, beam mounted
Spinner: 2"
Fuse Construction: hollow block lower shell with inset bearers glued in. 3/32" sides and planked top over formers
Tail: 1/8" sheet
Fin: 1/16" plywood
Wing: Sparless with 1/2" by 3/4" leading edge, 3/32" x 1-1/2" vee trailing edge, 1/8" ribs. Tissue covered. Internal controls

PerttiMe

The wing of the Mercury Team Racer Mk.1 does look about right.
I built a Blue Pants as a kid. Wish I still had it. Might even learn to fly it.

bill bischoff

The masking tape obscures things a bit, but the cowl parting line also seems to match the Mercury.

Dave Hull


PerttiMe

I've forwarded information from this thread to the guy with the airframe. Haven't received any feedback.

I tend to agree with the "modified Mercury Team Racer Mk.1" theory.
I built a Blue Pants as a kid. Wish I still had it. Might even learn to fly it.



Advertise Here