stunthanger.com

Product Review => Product Reviews => Topic started by: Steve Kientz on April 30, 2007, 05:53:34 AM

Title: Action hobbies/ Laser works
Post by: Steve Kientz on April 30, 2007, 05:53:34 AM: I ordered a short kit from Ed,everything looked great ,can't wait to get started building.
Steve
Title: Re: Action hobbies/ Laser works
Post by: Bill Little on April 30, 2007, 06:23:14 AM: Quote from: Steve Kientz on April 30, 2007, 05:53:34 AM
I ordered a short kit from Ed,everything looked great ,can't wait to get started building.
Steve

Hi Steve,

Which one, and what were the parts included?? ;D

Thanks
Bill <><
Title: Re: Action hobbies/ Laser works
Post by: Steve Kientz on April 30, 2007, 08:24:23 AM: The kit was the Super Satan.Near as i can tell all cut parts except for LE TE and spars. i also was able to get a set of plans (may not be available for ALL planes).Very prompt service,so much I called Ed and thanked him personally!
Title: Re: Action hobbies/ Laser works
Post by: Larry Wong on June 19, 2007, 09:13:47 PM: I also got a short kit from Ed it was a Super Chief, I'm building it now, and the fit is great just like the plans. the wood is also top rate. I got 3 kits cut one for me and 2 other friendsin are club, I will use my Magnum 36 XL it should be a great flyer. #^ #^ #^ #^ #^ y1
Title: Action hobbies/ Laser works
Post by: Superclown on June 20, 2007, 11:52:36 AM: A while back, I obtained a set of lazer-cut ribs from Eric Bell for a Super Chief wing. As usual, it was excellent work. However, would you believe me that when I went to build the wing, I had forgotten where I had stored the ribs. mw~ .

While I was on the internet, I saw that Eddie of Action Hobbies offered shorts kits of both the Super Chief and Chief. As it had been my intention to build a "New" Chief using the wing and empennage of the Super Chief and the fuselage of the Chief, I asked Eddie if he could provide such a kit for me. No sooner said than done. For only $93.00 I got a first class product. The wood was perfect, well suited to the task. He blew my mind when I saw the lazer-cut windshields. Fantastic.

My thanks to Eddie, H^^
Henry
Title: Re: Action hobbies/ Laser works
Post by: Leester on September 02, 2007, 09:04:31 PM: I ordered 2 complete rib sets for my MoBest project. I sent Eddie the templates from the plans and received them the other day. Absolutely great work, everything I asked for and under 35.00 to my door. Can't beat that.
Title: Re: Action hobbies/ Laser works
Post by: Bill Little on September 03, 2007, 01:35:59 AM: I always wanted a Sterling Polish Fighter. They are way out of my budget when a kit dies come up for sale so when i saw that Eddie was doing them in a short kit, I jumped on it! AWESOME! After the parts arrived I got an email that a few of the parts were not correct so Eddie sent me the correct ones free of charge. Can't beat the work or the service!
Title: Re: Action hobbies/ Laser works
Post by: BYU on September 20, 2007, 08:09:16 AM: Have you got a URL (we address), number or email for Eddie and Action Hobbies?

Thanks
Title: Re: Action hobbies/ Laser works
Post by: Superclown on September 20, 2007, 01:45:43 PM: Quote from: EliottScott on September 20, 2007, 08:09:16 AM
Have you got a URL (we address), number or email for Eddie and Action Hobbies?

Thanks

Here it is : #^

http://www.lazer-works.com/

Henry
Title: Re: Action hobbies/ Laser works
Post by: Bill Little on September 21, 2007, 09:19:43 AM: Quote from: EliottScott on September 20, 2007, 08:09:16 AM
Have you got a URL (we address), number or email for Eddie and Action Hobbies?

Thanks

Hi Eliott,

Action Hobbies is also in the Vendor's Corner. ;D

He does fabulous work, and super service. Eddie, Kyle Tankersly (Tank's Hanger), and Eric Rule (RSM) all do us modelers a great service with their laser cutting.
Title: Re: Action hobbies/ Laser works
Post by: Leo Mehl on December 31, 2007, 04:33:32 PM: Quote from: Steve Kientz on April 30, 2007, 05:53:34 AM
I ordered a short kit from Ed,everything looked great ,can't wait to get started building.
Steve
I had Ed setup and run me a short kit. I had him put tabs and holes for a jig in the ribs. I ran 5/32" rod thru to back hole and set the ribs down flat on the table. Everything lined up perfect. This means you can build wing on flat board or glass. I was really impressed. All parts were very exact. What a nice way to have a short kit made. Thanks a lot Ed. I recomend this if you want to improve your building. ;D ;D ;D ;D ;D ;D ;D ;D ;D HB~>