Author Topic: What have you printed lately? (Read 7310 times)

Paul Taylor · « **on:** March 21, 2025, 09:31:44 AM »

Show us what you have printed lately?

Anything that might be useful.

I just printed this.

https://www.thingiverse.com/thing:1852197

Howard Rush · « **Reply #1 on:** March 24, 2025, 08:18:46 PM »

18650 battery end caps

Howard Rush · « **Reply #2 on:** March 24, 2025, 08:21:27 PM »

Battery hold-down toggle

Howard Rush · « **Reply #3 on:** March 24, 2025, 08:23:04 PM »

Battery rails

Howard Rush · « **Reply #4 on:** March 24, 2025, 08:25:35 PM »

Between-cells balance connector mount

Howard Rush · « **Reply #5 on:** March 24, 2025, 08:27:53 PM »

IC3 connector mount

Paul Taylor · « **Reply #6 on:** March 24, 2025, 09:19:37 PM »

Very Kewl Howard!

Thanks for sharing

Dave Rigotti · « **Reply #7 on:** March 25, 2025, 03:34:52 PM »

Lets see...
Babe Bee profile motor mount, 1/2A handle, 5" line reel (2 different designs) A line reel winder handle, a 1/2A starter housing, A Sullivan Starter end caps to allow a 6S li-ion battery, a housing for my battery spot welder, and a 2204 electric profile motor mount. Not to mention my 3S, 4S, 5S Li-ion battery end caps. Did I mention JST connector condoms?

Howard Rush · « **Reply #8 on:** March 29, 2025, 03:00:28 AM »

Yet another line reel

Paul Taylor · « **Reply #9 on:** March 29, 2025, 01:21:10 PM »

"Rush Shark"

Is that a 4 in or a larger one?

944_Jim · « **Reply #10 on:** March 29, 2025, 01:48:05 PM »

Quote from: Dave Rigotti on March 25, 2025, 03:34:52 PM

Lets see...
Babe Bee profile motor mount, 1/2A handle, 5" line reel (2 different designs) A line reel winder handle, a 1/2A starter housing...a housing for my battery spot welder..."

Mr. Dave,
Where did you find the STLs?

Quote

Did I mention JST connector condoms?"

Is this a thing? What are "connecter condoms?"

Thanks in advance.

Dave Rigotti · « **Reply #11 on:** March 29, 2025, 02:23:26 PM »

STL's are my creations.
See pic for JST connector condoms Green=charged, Red=discharged.
See pic for 1/2A mount.

Howard Rush · « **Reply #12 on:** March 29, 2025, 02:59:02 PM »

Dave practices safe stunt.

Quote from: Paul Taylor on March 29, 2025, 01:21:10 PM

Is that a 4 in or a larger one?

4” at the bottom of the line groove. I can’t find the file for the big one.

Paul Taylor · « **Reply #13 on:** March 30, 2025, 08:32:17 AM »

Quote from: Dave Rigotti on March 29, 2025, 02:23:26 PM

STL's are my creations.
See pic for JST connector condoms Green=charged, Red=discharged.
See pic for 1/2A mount.

I do the same with my XT connectors. But I used one on Thingverse. Just use my heat gun to give them a little squeeze for tighter fit.

And if I still flew Cox motor I would use that mount. Nice work.

Paul Taylor · « **Reply #14 on:** April 02, 2025, 02:48:05 PM »

I have drawn up a cowl for my Pathfinder. It needed about an ounce of nose weight. As Windy use to say "nothing goes along for the ride" It's functional and looks cool. Comes out to about the right weight, might be a little lighter.

Paul Taylor · « **Reply #15 on:** April 02, 2025, 02:49:29 PM »

Doug Moon · « **Reply #16 on:** April 19, 2025, 10:17:00 AM »

Quote from: Howard Rush on March 24, 2025, 08:23:04 PM

Battery rails

That is really cool. Can you make a video how the hold down works?

Howard Rush · « **Reply #17 on:** April 20, 2025, 08:10:47 PM »

OK. I should fiddle with it first.

Howard Rush · « **Reply #18 on:** May 05, 2025, 07:48:30 PM »

I made a video, but it’s too big to post. I’ll email it.

Paul Taylor · « **Reply #19 on:** May 06, 2025, 07:28:50 AM »

Quote from: Howard Rush on May 05, 2025, 07:48:30 PM

I made a video, but it’s too big to post. I’ll email it.

You can copy the link and post it here.

Fred Cronenwett · « **Reply #20 on:** July 19, 2025, 04:26:57 PM »

I have printed the following items:

Custom shaped Spinners, cowls, Dummy radial engines, electric motor mounts, 5" line reels, Lipo battery boxes, ESC mounts, landing gear strut details, Stooge release units, handles (Hot Rock style and racing), and a host of other misc items.

Fred

Paul Taylor · « **Reply #21 on:** July 19, 2025, 05:46:27 PM »

Quote from: Fred Cronenwett on July 19, 2025, 04:26:57 PM

I have printed the following items:

Custom shaped Spinners, cowls, Dummy radial engines, electric motor mounts, 5" line reels, Lipo battery boxes, ESC mounts, landing gear strut details, Stooge release units, handles (Hot Rock style and racing), and a host of other misc items.

Fred

Fred that’s awesome. Most impressive list.
Feel free to post pictures of your handy work and the STL files if you are feel generous. 😁
Sparky now allows STL and SVG files.