stunthanger.com

Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on March 12, 2020, 09:36:12 PM

Title: RINGMASTER ROYALE
Post by: pat king on March 12, 2020, 09:36:12 PM

A 593 square inch 52 ½” span, tricycle gear, built-up fuselage Ringmaster. The laser cut kit comes with CAD plans with all parts shown full size. The airplane is for .45 to .53 engines. The wheels shown are for flying off grass, they give approximately 1 ½” clearance with a 12” prop. If flying off pavement use 2 ½” mains and 1 ½” nose wheel for approximately 1” clearance with a 12” prop. The kit does not contain any control system hardware. The removable cowl is attached with 3 ea. Socket head cap screws into blind nuts in the firewall. The kit includes an adjustable leadout guide and a weightbox. The center ribs are Eppler 479 airfoil, the other ribs are Eppler 479 airfoil from the leading edge to the spar. The wing is 2.2” thick at the spar. The design was built around an engine the size of an OS LA46, or an Enya 45 Model 6001. The kit does contain the canopy. The kits sell for $210.00 plus shipping. I need your zip code to quote shipping.

Pat

Title: Re: RINGMASTER ROYALE
Post by: frank mccune on March 13, 2020, 08:58:46 AM

          Hi Pat:

           What is the price of this kit?

                                                  Thanks,

                                                  Frank McCune

Title: Re: RINGMASTER ROYALE
Post by: pat king on March 13, 2020, 01:34:09 PM

Frank,
Price is $210.00 plus shipping from zip 60449.
Send me your zip code and I'll quote the total.
Thanks,  Pat