stunthanger.com
Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on August 15, 2015, 01:17:07 PM
-
This airplane is a step up from sheet wing 1/2A trainers. The simplicity and ease of repair of a sheet wing in an airplane for 3530 size outrunner motors. A simple, quick build combined with the ease of an electric drive system. What’s not to love? The airplane has a 33” wingspan and 225 square inches of wing area. This size airplane is easier to fly than a 1/2A airplane, but not large enough to be intimidating for the youngsters. Put this one on 52’ lines and get the rotational speed down to a comfortable level. The laser cut kits sell for $57.00 postpaid in the lower 48.
Thanks, Pat
-
Plenty of time to build and trim out one of these before the Ringmaster Fly-A-Thon October 3rd and 4th! #^