stunthanger.com
Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on February 12, 2013, 02:29:39 PM
-
The PEGASUS is designed for .049 to .061 beam mount engines. The airplane has a full fuselage, wing mounted gear, adjustable leadouts, a weight box, and flaps. It is designed for a balloon tank. The bellcrank is suspended, the kit has parts to build the 1/16 flap horn using music wire and a 1/32 ply horn arm. PEGASUS has a 34” wingspan and 235 square inches of wing area. If you are looking for a new 1/2A stunter this is an option. The kits will sell for $75.00 delivered in the Continental US.
Pat
-
would this plane work well witha thunder tiger .070? I just pick up one at a swap meet.
-
The airplane is .70" between the mounts. They could be cut away to clear a crankcase of .80" (13/16"). Unless the Thunder Tiger is wider than that it should fit fine. The design was done around an AP Wasp (Norvel clone) and a COX TD 049.
Pat
-
Here is the front of the airplane showing the Lee 1" spinner.
Pat