stunthanger.com

Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on February 11, 2018, 10:20:53 AM

Title: P-39Q Profile Scale
Post by: pat king on February 11, 2018, 10:20:53 AM
This laser cut kit is a 1/8th Profile Scale P-39Q. The airplane has a 51” wingspan and 482 square inches of wing area. It is for .40 to .53 engines. The fuselage has a ½” balsa core with 1/8 ply doublers up front and 1/8 balsa skins in the back. It has a ¼” balsa cheek up front on the inboard side. The CAD plans have full size templates of all the parts. The kit does not contain any control system hardware. Buyers will receive a .pdf of the 3 view used to design the kit. The kits sell for $160.00 plus shipping of 5 pounds from zip 60449. Full size .pdf files of the plan sheets are available for $5.00 for the set of 3 sheets.
Title: Re: P-39Q Profile Scale
Post by: wwwarbird on March 02, 2018, 09:32:26 PM

 Very nice Pat, looks great! The P-63 can't be far behind.  S?P ;D
Title: Re: P-39Q Profile Scale
Post by: pat king on March 03, 2018, 06:27:40 AM
The P-63 is farthur behind than you think Wayne. I have to finish a Chris Rud Stunter, a boat, and a Chance Vought V173 before I consider a P-63.

Pat
Title: Re: P-39Q Profile Scale
Post by: wwwarbird on March 06, 2018, 07:27:35 PM

 A Chris Rud stunter? Whatzit?
Title: Re: P-39Q Profile Scale
Post by: pat king on March 14, 2018, 11:07:58 AM
I will let Chris announce it when it is ready.

Pat