stunthanger.com
Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on September 05, 2017, 08:56:16 AM
-
The Minnow was the second Cosmic Wind racer built. It was the same configuration as all the other Cosmic wind racers. The Minnow was later completely rebuilt to be a shoulder wing, straight wing airplane. The entire shape of the airplane was changed. This laser cut kit is of the rebuilt, straight wing Minnow. The airplane is 96% of 1/8 scale. It has a 28” wingspan and 146 square inches of wing area. The kit contains all the laser cut parts, the basswood sticks, the Aluminum for the landing gear, the 4mm screws and nuts for the axles, the blind nut and screw for the Bellcrank mounting, and the nylon skid for the leadout guide. The kit does not contain any control system hardware. The CAD plans show all parts full size. The kits sell for $108.00 plus shipping of 3 pounds from 60449.
Pat
-
Subject says MINNOW but parts drawing says Polecat.
-
My Bad!!! Those are Minnow parts. I stole the border and title block from the POLECAT and missed changing the Title on Sheet 2.
I will fix that.
Pat