stunthanger.com

Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on October 15, 2015, 07:14:50 AM

Title: Mini Ringmaster Bipe
Post by: pat king on October 15, 2015, 07:14:50 AM

Do you have a Cox TD 020 without a home? Do you like Biplanes? Here is a Biplane for your Cox TD 020. It has a 17 ¼” top wing and 96 ½ square inches of wing area. There is no planking in the center of the top side of the top wing or the bottom side of the bottom wing. This is too much airplane for a Pee Wee 020. The first kits will sell for $33.00 with shipping and insurance included. Two wings, open cockpit, no round engine, but you can’t have everything. y1

Pat

Title: Re: Mini Ringmaster Bipe
Post by: Dane Martin on November 07, 2015, 08:01:02 PM

Unpacking the kit shows the excellent quality. ALL balsa is included, and hardware is there. You need nothing but lead out wire and an engine. I'll build this pretty soon and give a flying report. Mine will be electric and powered by eflite motor, castle esc and a thunder power 2s battery.

Also, note in pic two the cool location of the lead out guide! In the strut. Already lazered out!