stunthanger.com
Vendors Corner => PDK LLC Laser Cut Kits => Topic started by: pat king on January 31, 2011, 11:18:43 AM
-
I am getting ready to have the parts cut for the prototype of the Flying Fool kit. This was Sterling kit S12. Let me know if you would be interested in buying a kit when they are ready. The kits will be in the $100.00 to $110.00 range. I will have a better idea of the final cost after I get the laser cuts and all the wood in house.
Thanks, Pat
-
Hi Pat. Is it going to be a full kit or short kit and if a full kit, will it include any hardware? I been waiting for this one! %^@
-
Glenn,
I am planning a full kit, a short kit could be made available. The kit will include the wire for landing gear and pushrod, j-bolts for the gear, bellcrank and mounting hardware, and the control horn and mounting screws. The kit will include the Aluminum pads for engine mounting. The kit will not include wheels, the tank, or leadout material.
Thanks, Pat
-
Sign me up! H^^
-
Geeezzzzzzzz Louise, Pat! You're KILLING ME! LOL!!!!!!!!!!!
I still have my original (Christmas present 1965) but I am afraid to fly it. Built totally with Ambroid except the motor mounts. They were glued with a wood glue that you had to mix to use. It came as a powder and you added water, I *think* is was early Weldwood! Pretty sure about that.... Recovered it about 20 years ago. ;D
Big Bear
-
Bill,
Just save your Confederate money. After selling enough eggs and a hog you will be set. y1 I'll sell you one whenever you are ready. I do not plan a single run then no more kits. I may not always have them in stock, but I can always turn out another one.
Pat
-
Bill,
Just save your Confederate money. After selling enough eggs and a hog you will be set. y1 I'll sell you one whenever you are ready. I do not plan a single run then no more kits. I may not always have them in stock, but I can always turn out another one.
Pat
LOL!!!! Thanks, Pat.
Bill
-
Any word on when this is coming out? My dad is getting antsy lol
-
ME TOO! ME TOO! ME TOO! #^ (051)
-
Any word on when this is coming out? My dad is getting antsy lol
I ordered the laser cuts for the prototype kit, I have the stick and sheet wood. My laser cutter is very busy getting ready to go to VSC. I should get the Flying Fool and the Profile Scale Stearman PT 17 parts before I go to Texas later this month. As soon as I get the Flying Fool things sorted out and off to Dennis I may build the PT 17. #^ I am not great at finishing, but that is probably my second favorite airplane. y1
Pat
-
Sounds good!!!!!
-
Any word on when this is coming out? My dad is getting antsy lol
The prototype kit is at the builder, he will start on it soon. #^ The kits will be $96.50 shipping and insurance included.
Thanks, Pat
-
The kits are now for sale! #^ See the Want Ads.
Pat
-
Hello Pat. I would like a flying fool kit. Do you have a contact number? Joe.
-
Joe,
You can reach me at: 708-921-6322
I'll check to see if I have a Flying fool in stock when I go down to the shop in a bit.
Pat
-
I don't have a kit in stock. Contact me and tell me you want one, and I'll get a kit ordered.
Thanks, Pat
-
I lied! I found a Flying Fool kit packed and ready to ship. #^ #^
Pat
-
Is the flying fool kit still available???
-
Yes, it will take about 4 weeks after it is ordered.
Thanks, Pat
-
Pat what does the flying fool sell for what type of payment do yo prefer.and your mailing address please.I am new to the sight so if the info is posted elsewhere please forgive me.also do you have a updated price list on your kits?thank you...Butch
-
Pat,
Better put a picture here to let them remember what a Flying Fool looks like.
Dennis
-
Gee whiz, I still have the original Sterling kit, waiting to be built. Now I won't have to, I can get a new one, with good wood in it!
-
Butch,
Sorry to be so long in answering, I missed your post. Flying Fool kits are now $105.00 delivered in the continental US. You can use PayPal to: patdk at aol dot com . or send a check to:
Pat King
5133 W. Jason Dr.
Monee, IL 60449
Thanks, Pat