• April 23, 2024, 08:45:24 AM

Login with username, password and session length

Author Topic: CIRCUS KING 2022  (Read 2118 times)

Offline pat king

  • Moderator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 1353
    • PDK LLC
« on: September 19, 2022, 07:21:04 PM »
Designed by Matt Kania who also designed the Ringmaster. This airplane is the shape and size of a CIRCUS KING with a thicker wing. This airplane is NOT legal for OTS competition! The center rib is 16% thick. The spar is slotted for the ribs. The spar and ribs go together in “egg crate” fashion. The spar and spar caps have an “I” cross section. The 3” Bellcrank mounts suspended in the wing. The kit is laser cut, the CAD plans show all parts full size. The airplane has a 40” wingspan and 363 square inches of wing area. The kit includes the landing gear wire, the Bellcrank pivot wire, the pushrod wire, the Bellcrank, the landing gear clamps, and screws. The engine mounts are hard Maple. The kits will sell for $143.42 plus 4 pounds shipping from 60449. You can pay using PayPal or send me a check. Full size .pdf files of the plans are available for $5.00   Thanks to Scott Koster for loaning me the plans of the original!!

Pat King
Monee, IL

AMA 168941

Advertise Here

There are no comments for this topic. Do you want to be the first?

Advertise Here