stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Mike Griffin on December 30, 2023, 01:20:30 PM
-
I have been covering with polyspan for years and never had his happen. I made sure the slick/shiney side was up when I covered the wing. I filled it with dope and filled it as always. Did not have any fuzzies at all. When I have the covering filled adequately with dope, I put it on the paint stand and sprayed on a light coat of Klass Kote white and had fuzzies appearing everywhere. I think my only solution at this point is when the paint is dry, to wet sand with a fine grit paper. I have never had to do this so my question is what grit should I use to wet sand, 1000, 1500, 2000???
Thanks
Mike
-
2000 grit wet sanded should do it for you. 🤠
-
2000 grit wet sanded should do it for you. 🤠
Thank you Larry. I just never had to deal with this before and have no idea what caused it.
Mike