stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: Walter Hicks on September 30, 2015, 01:23:45 PM

Title: Tape 869 Windy U Video Richard Oliver finishing method
Post by: Walter Hicks on September 30, 2015, 01:23:45 PM

I am trying to find more information on the Finishing Method used by Richard Oliver as done on tape 869 Windy U video.

It looks like Auto Clear is used to seal wood, and attach glass cloth , not sure what is done from there . Can anyone clarify this

with specific products and steps? It would be really appreciated as I have enough base coat /clear coat paint to last me until

I am gone!!!! I like the Idea of Auto Clear to seal and attach glass cloth , using auto paint stuff from the get go.

Thanks for your help in adavance.

Title: Re: Tape 869 Windy U Video Richard Oliver finishing method
Post by: Walter Hicks on October 15, 2015, 12:50:02 PM

My main question is do you use intercoat clear to attach the glass cloth or two part ( with catalyst ) to seal the wood and attach the
glass cloth. I am assuming once you get the glass cloth on then you use auto primer to fill then basecoat clear coat.

#1. What clear to put on bare wood?

#2  What clear to put on glass cloth? How many coats of clear to fill?

The video seems to indicate clear with Catalyst , does this sand well???

Title: Re: Tape 869 Windy U Video Richard Oliver finishing method
Post by: Dennis Toth on October 15, 2015, 05:11:55 PM

Walter,
Here's the link to the YouTube video:

https://www.youtube.com/watch?v=7vvx6ya1tgw

Best,       DennisT

Title: Re: Tape 869 Windy U Video Richard Oliver finishing method
Post by: Walter Hicks on October 15, 2015, 05:51:37 PM

Thanks Dennis I have watched that video about 6 times. I am just needing some clarification