stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: James Mills on March 07, 2010, 06:52:50 PM

Title: Starting primer coats
Post by: James Mills on March 07, 2010, 06:52:50 PM

I finally shot the first coat of primer on my Formula S today (brodak polar gray w/a little white mixed in).  As usual with primer, it's Coyote ugly.  I went through the polyspan when sanding the fillets neat the wing, what's the best fix at this point (CA, tissue, thin coat of epoxy)?

Thanks,

James

Title: Re: Starting primer coats
Post by: Randy Powell on March 07, 2010, 10:16:17 PM

James,

I'd probably go with CA.