stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: Bill Little on January 20, 2011, 10:50:16 AM

Title: Rustoleum
Post by: Bill Little on January 20, 2011, 10:50:16 AM

I have only used Rustoleum once on a C/L model.  It was done in the "Brickhaus Method", and had no open bays.  The Rustoleum was used for trim colors over Monocoat ;D

I have a profile I want to use it on.  The wings are covered with silkspan, what do y'all do if you have to patch open bays?   How does the Rustoleum perform on the open bays?

Thanks,
Bill

Title: Re: Rustoleum
Post by: Paul Allen on January 20, 2011, 02:35:54 PM

Bill
    Have used Rustoleum on the open bays with no drama's so far,I know Alan
does not like it over dope, but it appear's to work OK on open bay's with a nitrate
dope base.On the fuz I would use a finishing resin setup, no dope.
Paul Allen
OZ
PS  Vector, all Rustoleum.

Title: Re: Rustoleum
Post by: john e. holliday on January 20, 2011, 03:28:50 PM

Is this the rustoleum every one talks about?? LL~ LL~

Title: Re: Rustoleum
Post by: Glenn (Gravitywell) Reach on January 20, 2011, 04:36:25 PM

No John...thats Rusty-Olium....totally diferent product!  LL~ H^^