stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Dudley Lang on April 24, 2010, 04:50:50 PM
-
I have just finished covering a new plane with monocote. I have always used silkspan and dope in the past. I don't like the trim scheme and wondered what is an easy way to remove trim from monocote. Also, I may want to remove all the monocote and start over with silkspan. So, if I select to remove everything, what's the easy way to do it. Thanks Dudley Lang
-
As far as removing trim, unless it will peal up you're probobly stuck with it. Removing the entire covering is a PITA, heat it up gradually untill you can peal it off then any residue I use accetone to clean the wood with. Good luck with whatever you decide on.