stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: James Mills on April 05, 2020, 06:29:34 PM
-
Looking at the Randolph color dope on Aircraft Spruce trying to find as close of a match to Miss Ashley Red as I can. Any suggestions?
Thanks
-
Looking at the Randolph color dope on Aircraft Spruce trying to find as close of a match to Miss Ashley Red as I can. Any suggestions?
Thanks
I would take my color sample to Walmart or whoever carries the complete line of Krylon aerosol can colors near you, and try to match it up. Krylon offers a few reds.
Or, you could try Tamiya Paint, also in aerosol cans or jars for air brush.
-
If Randolph's doesn't have a match, take a sample to an auto paint supply store and have them match it and supply the pigment. Then just add the pigment to your clear Randolph's. The big problem might be in finding one that's open, as they might not be "essential.". If it's electric you can shoot it in anything you want so they can supply it in lacquer. You can use their clear also with no compatibility issues.
Type at you later,
Dan McEntee
-
I've done what Dan mentioned many times. Just be sure to ask for pigment with no binder. The place I go to will mix as little as 1/2 pint, added to clear dope you a can probably get a quart of red.
-
If Randolph's doesn't have a match, take a sample to an auto paint supply store and have them match it and supply the pigment. Then just add the pigment to your clear Randolph's. The big problem might be in finding one that's open, as they might not be "essential.". If it's electric you can shoot it in anything you want so they can supply it in lacquer. You can use their clear also with no compatibility issues.
Type at you later,
Dan McEntee
The O'Reillys near me is still open and they are a paint store.
James
-
James,
You might want to call Randolph about matching a color. The last time I talked to them about compatibility and their tautening butyrate I believe they said they could mix a custom color. They, however, may have thought I was painting a 50 ft span aircraft and not a model, give them a call.
Steve
-
James,
You might want to call Randolph about matching a color. The last time I talked to them about compatibility and their tautening butyrate I believe they said they could mix a custom color. They, however, may have thought I was painting a 50 ft span aircraft and not a model, give them a call.
Steve
Thanks
-
If Randolph's doesn't have a match, take a sample to an auto paint supply store and have them match it and supply the pigment. Then just add the pigment to your clear Randolph's. The big problem might be in finding one that's open, as they might not be "essential.". If it's electric you can shoot it in anything you want so they can supply it in lacquer. You can use their clear also with no compatibility issues.
Type at you later,
Dan McEntee
So Dan, you just go to an auto paint supply store and ask for what pigment exactly? Acrylic lacquer pigment? Most of the auto paint supply stores here no longer deal in Acrylic Lacquers. Not sure if that matters.
-
Jim,
You might try dropping Wind U a note and asking him how to match the paint, since he developed it. Windy has a YouTube channel if you search YouTube for Windy U it will come up and you can send a comment.
Best, DennisT
-
Try Randolph Cadillac Red. Pretty Close.
-
Brodak sells Miss Ashley Red, which is Randolph.
https://brodak.com/pub/media/paint-chart.jpg
-
I dealt with Univair, the Randolph dealer in Colorado. They mix the colors on site. Unfortunately, I could not induce them to scan from my sample. They just mix what's on the menu. But they do have a higher-level parent company with a larger selection, which they will mix.
I was able to get Home Depot to scan samples and add pigment. If you are willing to risk a few quarts of Randolph white, you might try getting HD to tint it for you. I have done that with some success. Worst case is a quart of dope in a slightly off color.
-
I dealt with Univair, the Randolph dealer in Colorado. They mix the colors on site. Unfortunately, I could not induce them to scan from my sample. They just mix what's on the menu. But they do have a higher-level parent company with a larger selection, which they will mix.
I was able to get Home Depot to scan samples and add pigment. If you are willing to risk a few quarts of Randolph white, you might try getting HD to tint it for you. I have done that with some success. Worst case is a quart of dope in a slightly off color.
This is a good idea, and may be able to be done more accurately if there is an auto paint store that can do the tinting and mixing for you. You can start off with clear, and be more sure of the mix.
Type at you later,
Dan McEntee