stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Mike Griffin on November 12, 2018, 08:02:37 AM
-
Have any of you used the Preval Sprayers and what kind of success did you have with them?
Mike
-
Mike I buy these in bulk when they are an sale for under $7....and I use them as disposables for clear and colored dope
I used to try and keep the tubes and spray nozzels clean but too much grief...
The Nozzels are NOT good for fine detail and you must thin 50% or More in my experience to prevent sputter
I much prefer these to the 1" sable hair brush for doping large areas....just faster for me
Bottom line I like them for projects that setting up the HF compressor, line, filter, detail gun...is sort of a PITA --and then I am obligated to clean the gun...preval sprayer with 1 oz left over...in the trash...done!
-
Fred, where do they go on sale for $7.00?
Mark
-
https://www.ryderfleetproducts.com/preval-sprayer-pve267/sprayer-paint-complete-unit-p-tol-pve267
I have bought dozens of these under $7 for several years now
Last order
6 each @ 4.69
shipping 7.95
Tax 2.32
total 38.41
net was $6.4 each
-
Thanks for the link, Fred. I've a project or two that can use these. The last time I used one was on a fabric repair of my full size Experimental biplane about 20 years ago.
Mark
-
http://www.restockit.com/preval-sprayer-paint-sprayer-num-pve267.html
A little cheaper, but out of stock and who knows of the shipping?!
-
the propellant cans are $3.97 at our local Home Depot.
They do carry other Preval accessories as well.
Carl
-
At McFadden Dale hardware I found some 2 oz bottles that screw right onto the Preval power unit. Much better size for most of my work! I just cut the pickup tube to fit.
-
Awesome.