stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: Dan Bregar on January 20, 2012, 04:10:20 PM

Title: Polyspan sources
Post by: Dan Bregar on January 20, 2012, 04:10:20 PM

What size dimensions does polyspan come in, and what are the best sources ?  Is it all the same or are there differences ?  :)

Title: Re: Polyspan sources
Post by: Mike Callas on January 20, 2012, 06:54:19 PM

http://www.clcentral.com/proddetail.asp?prod=POLYT
http://www.faimodelsupply.com/starline-polyspan.htm
Shiny side up.

Mike

Title: Re: Polyspan sources
Post by: Dan Bregar on January 21, 2012, 09:37:08 AM

Thanks Mike

Title: Re: Polyspan sources
Post by: Mike Callas on February 08, 2012, 12:31:27 AM

Ooops,
One more, RSM just herded up some wild polys and skinned em.
Eric has it "In Stock"

Title: Re: Polyspan sources
Post by: Howard Rush on February 08, 2012, 03:13:44 PM

http://www.modelflight.com/larrydavidson.html

It's hard to tell which is the shiny side.  Uncle Jimby gave me a tip yesterday: Put a piece of tape on each side and peel it off.  The side that gets fuzzy goes down against the structure.

Title: Re: Polyspan sources
Post by: Dan Bregar on February 08, 2012, 04:30:51 PM

Good tip Howard !  I just got some from my local North Coast Hobby guy, Wayne Buran. When it comes time to cover with it I'll try your trick Howard.  Thanks


Dan

Title: Re: Polyspan sources
Post by: Mike Haverly on February 09, 2012, 02:26:39 PM

You can also drag across your face.  The difference is easily felt, at least by me