Thanks for the info. Are these product thin enough to be used with an airbrush?
I heard that Imron is VERY toxic and not to be used without professional grade protection.
I'm looking for something more fuel proof than dope.
Paul,
I don't believe you'll pump a two part auto clear through an airbrush with great success.
I just watched Robert put pen lines on a model that he eventually cleared in one of his many videos. All worth watching!
I believe Robert used a two part auto clear and a small detail spray gun. Robert is always open for questions. He tells it straight and leaves nothing out.
If you have a good compressor you're almost there. Small detail spray guns are now inexpensive. Professional grade expensive equipment isn't necessary.
I sprayed two part auto clears for years using professional equipment and spray booths. Air hoods for breathing protection or a good mask.
Today I use a good mask and 2K Spray Max aerosol cans. I spray outside. 18.00 a can.
Works fine.
Photos of the auto clear results on my models are everywhere.
And yes, you can sand and polish the 2K Spray Max if you choose. I choose not to.
I'm looking forward to seeing you're B-25 completed.
Go for it!
Charles