stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Larry Wong on May 19, 2022, 11:07:42 AM
-
Any of the twin guys have a way to use a paint stand on a Twin ?
-
Larry,
Here's photo of the paint stand I use. The adjustable wooded mount bolts to the motor shafts and is held in a bicycle repair stand.
Rick
-
Here's a picture of Gordan Delaney's rig for painting twin airplanes.
-
Thanks guys I get the idea. y1 y1 HB~>
-
For my twins I make a "shoe" that goes into the battery compartment. The rear of the shoe has a 1/8-inch tab that fits into the 1/8- inch slot that is used to hold the rear of my battery plate. The front of the shoe is bolted to the 1/8-inch Lite Ply floor of the battery compartment. The front of the shoe has a blade that fits into my rotating stand.
Later - Bob
-
For my twins I make a "shoe" that goes into the battery compartment. The rear of the shoe has a 1/8-inch tab that fits into the 1/8- inch slot that is used to hold the rear of my battery plate. The front of the shoe is bolted to the 1/8-inch Lite Ply floor of the battery compartment. The front of the shoe has a blade that fits into my rotating stand.
Later - Bob
Now that is what I was thinking of but not sure how. BOB YOU ARE THE MAN. #^ #^ #^
-
I made a T-shaped mount to fit on the paint stand and fastened the landing gear to it...
https://stunthanger.com/smf/paint-and-finishing/painting-hutch's-p-38/msg556342/#msg556342