stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: Avaiojet on December 28, 2011, 12:39:44 PM

Title: GRAPHICS! Do your own, and for free!!
Post by: Avaiojet on December 28, 2011, 12:39:44 PM

 Because of an inquiry I received from a CL modeler, I dug this old Thread up from RCU.

Explains in some detail how to acquire free vinyl material AND how to do your own graphics and lettering.

Yea, yea, I know it's a Corsair, but this works for any shape, design or lettering.

It's all the same but different!

So, go for it, start doing your own vinyl graphics, trim and lettering.

Here's the link!

Oh! BTW, I have plans for that Corsair, it will be modified for CL, but still done up as a F2G! Here's a photo of my favorite Corsair also!

http://www.rcuniverse.com/forum/m_8462647/anchors_8462647/mpage_1/key_/anchor/tm.htm#8462647

Title: Re: GRAPHICS! Do your own, and for free!!
Post by: Randy Powell on December 29, 2011, 09:54:15 AM

I've been looking at vinyl cutters, but haven't been happy with the software.

Title: Re: GRAPHICS! Do your own, and for free!!
Post by: Avaiojet on December 29, 2011, 10:05:36 AM

Randy,

You no longer have to look. You have me now!  ;D

My software, over 3K. My cutter, over 3K.

I made this investment just for you.

I see you have built wings with arched LE and TE. Any of them, "X" ribs, like Graham's.

I did ask you a question about one of your wings. Actually a great looking model. #5, with checks, I believe, red in color.

I'm gathering info on wings with diagonal rib construction.

Can you offer?

CB