Yea, all my spots were on the top. Sigh ....
I took some thick CA, ran a very small bead and used a piece of 1/64" ply to scrap over the effected area. Let it dry, sand a bit and put a very small bit of filler over it. Once dry, sand and reshoot color. Can't see the repair. Only thing I worry about is whether it will hold up. Guess we'll see.
Howard,
These are very small areas. cuts less than a 1/4" If bigger, the silkspan trick it really all that is available. And as far as tearing the silkspan, I do that when I cover the plane. No cut edges. As you note, it makes blending a LOT easier.