I need some advice. Ill be building a ringmaster in somewhat of a hurry and am trying to plan out the finish. One area i keep getting stuck on is the wing fillets. I want to ultracoat the wings and paint the fuselage with something (maybe dope, maybe rustoleum). My quandry is the fillets. Should i cover the wing with the film running right up to the fuse and then apply the fillets, or should i leave a little space between the fuse and the film for the epoxy to stick to the wood. Then, when i paint the fuse, the fillets will be painted and likely there will a slight overlap of paint on the ultracoat film. Will dope or rustoleum even stick to ultracoat? This may seem pretty elementary to most of you, but i usually just do dope and silkspan and never have to think about compatability/adhesion. I have never used film before and am just wondering. Thanks for your help!