Here's a picture of my Fancherized Twister. I built it from the PAMPA plans and it has a Fox 40 on it. I've flown it maybe 6 or 7 times. It's pretty much trimmed out except I will probably speed the elevator up a bit. Flies great so far. I have the elevator/flap controls set up 1:1 as the plans suggested to start out. I'm still working on finding the right diameter and pitch on the prop. I've got an 11X5 Zinger on it right now. I started with a 10X6 Top Flight but that was pulling it too fast. I haven't weighed it yet but it's nice and light. I went with the DuBro Ball Links, 1/4" arrow shafts, double control horns on the flaps and a 3" bellcrank for the controls. It has adjustable leadouts and a weight box on the outer tip. Fuselage is finished in Rustoleum and the wing and tail surfaces are Chrome Monokote. Nose is 1/16" ply doublers with 1/2" balsa triplers. It has an adjustable tank height, the wing has half ribs and shear webbing. I shortened the nose by 3/8" anticipating the extra weight of the Fox 40 but I ended up mounting it at the same place where the plans show the recommended LA 25 to be mounted. It didn't take any weight on the tail to get the CG.