stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: roger on May 28, 2009, 06:11:39 PM

Title: ef4u
Post by: roger on May 28, 2009, 06:11:39 PM

im about to cover an open bay corsair wing with monocoat whats the best way to do so with that gull wing split? top and bottom ???

roger

Title: Re: ef4u
Post by: Ralph Wenzel (d) on May 28, 2009, 07:12:02 PM

I don't think it can be done with two pieces of Monokote. I'm pretty sure you'll end up with 8 pieces; one each for top and bottom of each of the 4 wing panels.

It might be possible to do the bottoms with one piece each, but I wouldn't attempt it.

Title: Re: ef4u
Post by: Allen Burnham on August 04, 2009, 09:24:44 AM

I covered my polyhedral sailplane wings with one piece on the bottoms and a piece for each section on the tops....however they are flat bottom airfoils. I would reccommend using sperate pieces on your Corsair.