Building Tips and technical articles. > Paint and finishing
Covering "FASCAL"
Steve Tomlinson:
Old Combat / Sport/ Profile carrier guy here.
Guys, getting back into hobby. In the old days (70's /80's), flew a lot of fast and slow combat (Flite streaks, voodoos, guillotines, spectrums and such) and after going thru the silk / dope routine, settled on FASCAL after Howard Rush exposed it to us in the NYC area.
My roll of this stuff is long gone, but since I am building again, keep thinking how great that material was and would be for sport type profile planes (busters, akromasters, twisters, F51's etc) (just like the old days).
I have built last four planes using Monokote / Ultracote and unlike most of you, not into the super finishes.
ANYBODY KNOW IF FASCAL can still be purchased and what grade or type would I buy and applicable sources? HOWARD RUSH: YOU OUT THERE?
Paul Wood:
Steve, Do a search on here for Fascal. Lot of info to be found. Might be able to find what you're looking for.
Paul
Steve Tomlinson:
Thanks, Paul
I did a search and lots of "mentions" of Fascal, but no details on sources, availability now, etc. etc.
Hopefully HOWARD RUSH will see this.
Craig Beswick:
A Google search revealed this.
https://www.printsolutions.ie/products/400-fascal-series.html
Craig
Fredvon4:
Read this entire Thread from last June in the Combat section
https://stunthanger.com/smf/combat/fas-cal-covering-back-in-the-day/msg585020/#msg585020
Navigation
[0] Message Index
[#] Next page
Go to full version