stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Steve Tomlinson on September 21, 2020, 02:27:56 PM
-
Old Combat / Sport/ Profile carrier guy here.
Guys, getting back into hobby. In the old days (70's /80's), flew a lot of fast and slow combat (Flite streaks, voodoos, guillotines, spectrums and such) and after going thru the silk / dope routine, settled on FASCAL after Howard Rush exposed it to us in the NYC area.
My roll of this stuff is long gone, but since I am building again, keep thinking how great that material was and would be for sport type profile planes (busters, akromasters, twisters, F51's etc) (just like the old days).
I have built last four planes using Monokote / Ultracote and unlike most of you, not into the super finishes.
ANYBODY KNOW IF FASCAL can still be purchased and what grade or type would I buy and applicable sources? HOWARD RUSH: YOU OUT THERE?
-
Steve, Do a search on here for Fascal. Lot of info to be found. Might be able to find what you're looking for.
Paul
-
Thanks, Paul
I did a search and lots of "mentions" of Fascal, but no details on sources, availability now, etc. etc.
Hopefully HOWARD RUSH will see this.
-
A Google search revealed this.
https://www.printsolutions.ie/products/400-fascal-series.html
Craig
-
Read this entire Thread from last June in the Combat section
https://stunthanger.com/smf/combat/fas-cal-covering-back-in-the-day/msg585020/#msg585020
-
Steve,
Go to the book of faces (autocorrect won't allow the actual name)
Get to the Miniature Aircraft Combat Assoc. page
In there I have all the information about getting fascal
Fascal was a product name. Now it is currently made by Ritrama
I'll repost some information here
The stuff you remember as Fascal is the 1 mil
1 mil is part number 3-7146 (CLEAR POLYESTER, 1-mil OL with #22 clear adhesive and 1.2-mil polyester film liner
They use a 1.2 mil polyester film liner that the covering material is stuck to. Original fascal used a paper liner but the poly is lighter, cheaper, less bulk and is just a carrier so it gets tossed anyway.
To find a supplier just google Ritrama and that part number
Last roll of 1 mil I got from Midwest sign and screen printing
https://www.midwestsign.com/ritrama-3-7146-1-mil-polyester-overlaminate-27-x-750-gloss-clear
I have attached the cut sheet for the 1 mil film to this post