stunthanger.com

Building Tips and technical articles. => Paint and finishing => Topic started by: Jerry Rauch on December 09, 2009, 06:31:55 AM

Title: Checkerboard iron on or decals
Post by: Jerry Rauch on December 09, 2009, 06:31:55 AM

Does anyone know where I can get 1" black/white checkerboard iron on or decals? Sig doesn't offer their checkerboard iron on in 1" anymore, (only 2").  Others I found only offer 1/4" or 1/2". I'm going to build an old  Sig Ryan STA and need 1" for the elevator and stabilizer. I already have the 2" for the wings. I would rather not have to paint the checkerboard design, but I guess I would as a last resort.

Title: Re: Checkerboard iron on or decals
Post by: Jerry Rauch on December 09, 2009, 06:37:50 AM

Sorry all, after I posted, I googled Ultracote, and found 1" checkerboard iron on.

Title: Re: Checkerboard iron on or decals
Post by: Bob Reeves on December 09, 2009, 08:23:25 AM

Only one I know of that even makes iron on checkerboard is Ultracote from Horizon. This may be the 1/4 and 1/2 you found? Been a while since I looked..

Title: Re: Checkerboard iron on or decals
Post by: Jerry Rauch on December 11, 2009, 05:54:10 PM

I thought I saw 1' black/white. I'll check again.

Title: Re: Checkerboard iron on or decals
Post by: john e. holliday on December 12, 2009, 09:19:29 AM

Do a search on how Sparky did his checker board on the P-47's.  That is if the thread is still here after several wipe outs of the main computor.