stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Allan Leonard on October 25, 2018, 11:16:00 AM
-
Is the Brodak heat shrink covering polyspan like or Sig Koverall like?
Thanks
-
Cheap monokote like.
I got 2 rolls of Olive drab when they had their buy 1 get 1 sale. Tried using once amd was a pain. Altho ive seen the work of others and it comes out nice.
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
I too tried Brodaks Monokote copy and the white was unworkable. The other two colors(blue & red) were okay for a while but were hard to get sealed. D>K
-
My one and only use was Brodak Black...made me throw all three other color rolls away......IMO twas junk and ruined my wing....grrr
The problem: stuck down perimeter....went to shrink...pulled loose at perimeter...the more I fused the more it released....leaving the black glue pigment on the balsa and clear plastic not stuck to anything....a bad mess on a perfectly good built Big Otto... very perplexed....love a lot of Brodak but the film is junk IMO
BTW I have had pretty good luck with the Hobby King stuff
-
My one and only use was Brodak Black...made me throw all three other color rolls away......IMO twas junk and ruined my wing....grrr
The problem: stuck down perimeter....went to shrink...pulled loose at perimeter...the more I fused the more it released....leaving the black glue pigment on the balsa and clear plastic not stuck to anything....a bad mess on a perfectly good built Big Otto... very perplexed....love a lot of Brodak but the film is junk IMO
BTW I have had pretty good luck with the Hobby King stuff
Exact same for me. Like i couldnt find a good heat setting on my iron that it liked. Either too hot or too cold
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
I think everyone but Motorman has got "Brodak Kolar Kote" mixed up with "Brodak Heat Shrink Covering".
-
I guess you are right. I went to the Bodak site, besides the usual tissue and silk lists the following: Kolar Kote, doesn't say what it is, Fabric Covering woven cloth, Plastic Covering( which is what is what I think the first covering I got was) polypropylene and Heat shrink covering which is polyester cloth. H^^