stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: Paul Taylor on May 16, 2011, 01:32:30 PM
-
Has any every put Brodak colors over randolph clear butyrate?
Then put randolph clear back over top of Brodak colors?
-
Yep, no problem just allow proper dry times.
Mike
-
I have done exactly that with the current finish I am working on. But I did use the same thinner for both. No Problem...
-
Thanks guys.
Hey Allen, was that Brodak thinner or Randolph thinner?
-
I've done exactly what you describe with Randolph thinner throughout. No problems at all. I would expect the same result with Brodak thinner.
-
Thanks guys.
Hey Allen, was that Brodak thinner or Randolph thinner?
Neither, I used Finish Pro Slow lacquer thinner which I can get in gallons ($24) at my local auto body supply shop.
I also added about 10% Randolph retarder, but only for the final clear coats.
-
Hi Paul,
Check Randolph's web page for distributors. You'll see that Brodak is a distributor for Randolph's It is the same dope, however Brodak has made more colors than can be obtained from Randolph, in fact, quite a few and has made it all available in smaller quantities. Randolph's smallest quantity is a quart.
Ya pays yer money and makes yer choices!
Not a problem with either "Brand".
Bob
-
I get Randolph's dope from Aircraft Spruce and Specialty...it's in South Atlanta about 40 minutes from
me...sure beats paying the shipping. A gallon of clear is like 47 bucks with colors a little more...thinner
is 24 a gallon for either butyrate or nitrate. Dopes are available in tautening and non-tautening.