stunthanger.com
Building Tips and technical articles. => Paint and finishing => Topic started by: James Holford on July 24, 2018, 06:23:00 AM
-
Has anyone sprayed 2k rattlcan clear over Rustoleum with good results?
If so, what was your process?
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
you can try it on the cardinal fuselage that is white rustoleum gloss protective enamel
-
you can try it on the cardinal fuselage that is white rustoleum gloss protective enamel
Sounds good
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
Jim,
It should work fine if the Rustoeum is fully cured out, about two weeks at normal house temperature (72F). You should do a light sanding of the surface and then a cleaning with degreaser before appling the 2K.
Best, DennisT