stunthanger.com

General control line discussion => Open Forum => Topic started by: Phil Spillman on February 09, 2015, 06:55:54 PM

Title: Zingali Props Repitching?
Post by: Phil Spillman on February 09, 2015, 06:55:54 PM

While digging through my stash, I came upon a tattered box with a dozen or so 11 X 7 Zingali props. I bought them from a guy who also sold me several diesel engines on which to use them. I've since sold off the engines but still have the props! Can these be pitched or should I just sell them? If I do re-pitch how do I do this with the least amount of work? Please help!

Phil Spillman

Title: Re: Zingali Props Repitching?
Post by: Gerald Arana on February 09, 2015, 07:12:39 PM

Sell'em! ;D

Jerry

Title: Re: Zingali Props Repitching?
Post by: Chris Wilson on February 09, 2015, 09:42:31 PM

If these are the heavy black fibreglass ones I would toss them out!

Too stiff and thick to re-pitch and too heavy much for much else besides  running an engine in with an added flywheel effect.

Title: Re: Zingali Props Repitching?
Post by: Chris McMillin on February 10, 2015, 01:28:25 AM

Dope stir sticks, no one in R/C will use them either.
Chris...

Title: Re: Zingali Props Repitching?
Post by: Bob Reeves on February 10, 2015, 08:47:20 AM

Might work on a Saito 40 four stroke, what will you take for the whole lot plus shipping? Worst case I'll use them for stir sticks.

Title: Re: Zingali Props Repitching?
Post by: Chris Wilson on February 10, 2015, 05:01:56 PM

Actually an 11X7 is the preferred prop for the PAW 40 but Since I have some of these in my stash I really do think that the weight may be their undoing (even for a diesel!)