stunthanger.com

General control line discussion => Open Forum => Topic started by: Shorts,David on July 05, 2021, 09:54:35 AM

Title: yatsenko parts
Post by: Shorts,David on July 05, 2021, 09:54:35 AM

Hi everyone. When considering a new plane, I noticed Yatsenko brothers have a ready made wing removal cradle and fuselage take apart system. Does anyone know how to order parts from them, or how much these items cost?

And, does anyone else have experience with the Discovery retro 60 or 76. I'm curious about their performance, but I do know the sound is very nice!

Title: Re: yatsenko parts
Post by: Craig Beswick on July 07, 2021, 02:31:52 AM

David,
to order from discovery- aeromodels, email Yuriy at.
yuriy.iatsenko@gmaill.com
His written English is okay and I found him good to deal with.

Craig

Title: Re: yatsenko parts
Post by: Shorts,David on July 07, 2021, 11:43:48 AM

Quote from: Craig Beswick on July 07, 2021, 02:31:52 AM

David,
to order from discovery- aeromodels, email Yuriy at.
yuriy.iatsenko@gmaill.com
His written English is okay and I found him good to deal with.

Craig

Thanks Craig, that's not the email I was trying, I'll try that one.

Title: Re: yatsenko parts
Post by: Mike Alimov on July 07, 2021, 02:29:50 PM

There is a "CONNECTOR KIT FUSELAGE-WING FOR F2B MODELS" listed on TechnoHobby site for $179 (no picture, so not sure what's included), which sounds close to what I've heard from others: https://technohobby.com.ua/accessories/accessories-discovery/ckfwf2bm.html

Notice that the Yatsenko method forces you to into a certain fuselage width (75 mm ~ 3") and certain wing thickness, because the central bulkhead unit is machined as a rigid rectangle.