Howard,
I knew I had picked the right spot to come fly,, drats,, To bad my plans got changed at the last minute! I got blown out here this morning in Pullman,, gusts above 20,, steady wind at 15 or better,, I repowered the Freelancer with Pats Magnum, and the Oriental had a replumb job and I needed some confiramtion flights,,
fortunatly the wind calmed to a nice steady 5 mph breeze more appropriate for test and trim sessions.
Got in 4 or 5 flights with my stooge,, or uh, Linda,,

both planes proved out, enough power on the freelancer,, 13x5 XOAR prop, just a touch to much load I think, I will trim it about a 1/2 at the tips and try again, or try the TT 12.5x5.5 and see how that does, I have about 5 or 6 props to try on it now that I know it has enough power. Still goes gollywankers in the first loop of the clover which I dont understand,, that isnt one of the places I normally have issue? everything else was pretty solid.
The Oriental was mucho better, actually held needle setting,, still dont know what fixed it,, sigh,,