stunthanger.com
General control line discussion => Open Forum => Topic started by: Paul Taylor on October 24, 2014, 09:22:47 PM
-
I found balsa on SHH but no motor mounts. I found motor mounts on Brodaks site but no balsa.
Building a IC profile.
Where do you buy both motor mounts and balsa?
-
SIG! H^^
Type at you later,
Dan McEntee
Edit to add: Check out Tom Morris also. You may not see it on SHH but may have to ask for it. I know Tom sells maple motor mount stock when he is set of at contests.
-
Tom Morris has both.
Mike
-
Where do you buy both motor mounts and balsa?
SIG.
-
And National Balsa. I have yet to order anything from them, though.
-
for motor mounts, got a table saw? I cut my own out of birch or hard maple that I can get locally.
-
Paul,
If you had come to the Baton Rouge contest you could have gotten them directly from Tom Morris. He had a great selection. You should join us next year. It's worth the trip from Memphis.
Steve
-
Steve its on my bucket list.
I have been on the road all month. Just got in from PDX last night.
I am one tired puppy! Z@@ZZZ
-
Is the maple at home depot any good for motor mounts?
-
Maple is Maple. It varies a bit as all woods do. Surprised to hear that H D has maple. I found maple, not advertised as such, garden stakes at ACE hardware. I cut them with a cheap Chinese table saw with some difficulty. Perhaps a different blade would have made it easier. I am sure they will work just fine. They have been no problem with the building part. The flying part will be tested next year.
-
http://www.homedepot.com/p/Sure-Wood-Forest-Products-1-in-x-2-in-x-6-ft-Maple-Board-MAPLE1X26-3PL/100085686