stunthanger.com

General control line discussion => Open Forum => Topic started by: Wynn Robins on February 28, 2008, 12:56:18 PM

Title: Who can Laser cut kits???
Post by: Wynn Robins on February 28, 2008, 12:56:18 PM

Seems like all the cottage guys are going out of cutting kits - bar Eric Rule........is there anyone else around that can cut me kits????   

getting frustrated!!!!

Title: Re: Who can Laser cut kits???
Post by: Bill Little on February 28, 2008, 01:01:16 PM

Hi Wynn,

From our own *Vendors COrner*!  Action Hobbies/Lazer Works

Eric Rule at RSM does some fine laser cutting, also.

Kyle Tankersly (Tank's Hanger) is who I used a bunch, but he has lost Lone Star (his balsa supplier).


Pat Johnston (partnered with Dee Rice) is beginning to offer laser cutting of the plans he has drawn.

Maybe there ar emore that I do not know about.

Title: Re: Who can Laser cut kits???
Post by: ash on February 28, 2008, 01:13:36 PM

Slipstream models in Mangere or Modeltech in Mt Eden can do it. They'll need the parts drawn properly, they won't translate paper plans into laser cut parts by themselves.

Title: Re: Who can Laser cut kits???
Post by: Bill Morell on February 28, 2008, 01:27:59 PM

Kyle will still laser cut parts but you have to send him the wood to cut from. His stock is just about out.

Title: Re: Who can Laser cut kits???
Post by: Bill Little on February 28, 2008, 05:04:40 PM

Quote from: crash2much on February 28, 2008, 01:27:59 PM

Kyle will still laser cut parts but you have to send him the wood to cut from. His stock is just about out.

Thanks, Bill I thought I had heard that, but I didn't want to say with out being sure!  Kyle is another really great guy.  We have a lot of them in the hobby now!

Title: Re: Who can Laser cut kits???
Post by: Sam Laughery on February 28, 2008, 05:41:05 PM

John Brodak will laser cut kits for you.  Just email him at flyin@brodak.com.  It's best that the parts already be in autocad but can be set up from paper plans at a cost.



Sam

Title: Re: Who can Laser cut kits???
Post by: Bill Little on February 28, 2008, 09:38:50 PM

Quote from: Sam Laughery on February 28, 2008, 05:41:05 PM

John Brodak will laser cut kits for you.  Just email him at flyin@brodak.com.  It's best that the parts already be in autocad but can be set up from paper plans at a cost.



Sam

Thanks, Sam. 

I didn't know John was laser cutting, himself (company) but I should have guessed it!  ;D

Title: Re: Who can Laser cut kits???
Post by: dave siegler on February 29, 2008, 07:23:49 AM

I have used this serivice

http://ak-models.com/

great work low setup charges good feedback on my cad file and how to keep cut time down


Dave