stunthanger.com
General control line discussion => Open Forum => Topic started by: Dan McEntee on July 20, 2019, 07:46:59 PM
-
I'm going through some of my stuff trying to restore order in the universe here, and I came across some hardware from a company called Union 2000 Model Accessories, complete line of products for C/L models. It's all metal and a dark, copper sort of color. No part numbers or descriptions of any kind on it. Does this ring a bell with anyone? I did one quick google search and nothing came up.
Type at you later,
Dan McEntee
-
Dan,
I have a set of what looks like engine mount rails from the same company. Directions say to tap to 3mm.
John
-
Dan,
check your PM.
-
The dark copper color sounds like alodine anti-corrosion finish on aluminum. I've seen some Soviet FAI FF hardware with that sort of finish. It's cheap and effective. I may have the spelling wrong. :P Steve
PS: Got up at 5am, not to go fishing, but to go rent a cement mixer. This was my first and hopefully last experience with pouring concrete. Ugh! I'm pretty well knackered, as an Aussie would say. 24 x 60 lb sacks, OMG. But I came out exactly right, not too much, and not too little. CLP**
-
The dark copper color sounds like alodine anti-corrosion finish on aluminum. I've seen some Soviet FAI FF hardware with that sort of finish. It's cheap and effective. I may have the spelling wrong. :P Steve
PS: Got up at 5am, not to go fishing, but to go rent a cement mixer. This was my first and hopefully last experience with pouring concrete. Ugh! I'm pretty well knackered, as an Aussie would say. 24 x 60 lb sacks, OMG. But I came out exactly right, not too much, and not too little. CLP**
"flat out like a lizard drinking" is an alternative :-)
-
I think Brett and his brother could share some of your experience with pouring concrete...
Gary
-
"flat out like a lizard drinking" is an alternative :-)
Heard that before, but don't quite understand it. What kind of lizard? What's 'e drinking, mate? Frosties? I preferred Castlemain's xxxx. LL~ Steve