stunthanger.com

General control line discussion => Open Forum => Topic started by: James Mills on September 20, 2017, 08:59:16 PM

Title: Werewage P-47 Thunderbolt
Post by: James Mills on September 20, 2017, 08:59:16 PM

I have tried to search for the wing area of Billy's Thunderbolt with no luck.  I have the plans packed away in storage and can't get at them for a while.  Can anyone help?

Thanks,

James

Title: Re: Werewage P-47 Thunderbolt
Post by: Dan McEntee on September 20, 2017, 09:01:56 PM

Email Sparky. He's built three of them, I think.
  Type at you later,
  Dan McEntee

Title: Re: Werewage P-47 Thunderbolt
Post by: Dane Martin on September 20, 2017, 09:12:40 PM

This is one of the ones sparky built. Joey Mathison owns it. He'll put up a flight every now and then with it.

Title: Re: Werewage P-47 Thunderbolt
Post by: pat king on September 20, 2017, 10:20:20 PM

I did the CAD work for the kits that Chris Rud offered. The actual wing area is 677 square inches. the original plans state something like 700 plus square inches. I sell profile kits of the Werewage P-47 with the "Improved" wing with the larger chord.

Pat

Title: Re: Werewage P-47 Thunderbolt
Post by: M Spencer on September 21, 2017, 03:14:24 AM

(http://library.modelaviation.com/system/files/styles/zoom1800/private/ma/ma200607/ma200607_040.jpg?itok=dKUGKcDk)

the Whole shooting box is Here ; http://library.modelaviation.com/ma/2006/7/aerobatic-p-47-thunderbolt-200607

But it dosnt appear to have any Wing Area . !  S?P

( comes up much bigger there . )

Title: Re: Werewage P-47 Thunderbolt
Post by: Don Jenkins on September 21, 2017, 08:01:57 AM

Quote from: pat king on September 20, 2017, 10:20:20 PM

I did the CAD work for the kits that Chris Rud offered. The actual wing area is 677 square inches. the original plans state something like 700 plus square inches. I sell profile kits of the Werewage P-47 with the "Improved" wing with the larger chord.

Pat

Pat,

What size engine (glow) is recommended for your profile version, if it's around a .60, I may purchase one.

Don

Title: Re: Werewage P-47 Thunderbolt
Post by: RandySmith on September 21, 2017, 12:52:41 PM

Quote from: James Mills on September 20, 2017, 08:59:16 PM

I have tried to search for the wing area of Billy's Thunderbolt with no luck.  I have the plans packed away in storage and can't get at them for a while.  Can anyone help?

Thanks,

James

The first ones were  696  sq in, I think the  RED one  was  about 710

Randy

Title: Re: Werewage P-47 Thunderbolt
Post by: pat king on September 21, 2017, 01:10:31 PM

Quote from: Don Jenkins on September 21, 2017, 08:01:57 AM

Pat,

What size engine (glow) is recommended for your profile version, if it's around a .60, I may purchase one.

Don

Don,
I bumped up the listing in the Vendors Corner. My kit has 719 square inches . It is for a .60 to a .67 engine.

Thanks,  Pat