stunthanger.com

General control line discussion => Open Forum => Topic started by: Leo Mehl on February 27, 2013, 03:04:55 PM

Title: wanted- Tornado 3hree bladed props
Post by: Leo Mehl on February 27, 2013, 03:04:55 PM

I need to get a few 10X6 tornado three bladed props. Anyone out there got them. Thanks, Leo

Title: Re: wanted- Tornado 3hree bladed props
Post by: Trostle on February 27, 2013, 06:23:46 PM

There have been some carbon copies of those Tornado three blade props.

I am not sure but Eliminator Props by Steven Wilk might have something like that.  You might check with him.  He is in the Vendor's Corner of this forum.

Also, Randy Smith might know where these carbon copies can be obtained.

I have some of the Tornado props, but would not be ready for anyone to use them.  Mine have been used.  They are old.  They may not be safe.  It is the same story whether you are asking about the older grey ones or the black ones that I think were impregnated with either carbon or glass.

Keith

Title: Re: wanted- Tornado 3hree bladed props
Post by: Leo Mehl on March 03, 2013, 11:36:57 AM

Thanks Keith. They are hard to find. HB~> HB~> HB~>

Title: Re: wanted- Tornado 3hree bladed props
Post by: peabody on March 03, 2013, 11:44:40 AM

I have a 10-4 3 blade

Title: Re: wanted- Tornado 3hree bladed props
Post by: Balsa Butcher on March 03, 2013, 08:22:00 PM

I have one I can donate to the cause. It's lightly used, black, in good shape. PM me w/shipping info. 8)