stunthanger.com

General control line discussion => Open Forum => Topic started by: dagored on July 11, 2022, 07:31:04 PM

Title: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: dagored on July 11, 2022, 07:31:04 PM

who make's or sell's Venturi's and needle valve assembly for OS LA .40 and FP .35 ....

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: Walter Hicks on July 11, 2022, 09:18:29 PM

Shtterman on Ebay- He has everything you need . Great to deal with super good service . I have used him for years

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: dagored on July 11, 2022, 09:22:47 PM

Ok Thx Walter ..... H^^

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: dagored on July 11, 2022, 09:26:16 PM

is there any one else than that guy ,  Shtterman on Ebay- ...???

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: Motorman on July 11, 2022, 09:28:46 PM

Get in touch with Randy Smith. He's on this forum in the Vendor section under Aero Products.

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: dagored on July 11, 2022, 09:32:21 PM

Thx Motorman ....

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: Paul Taylor on July 11, 2022, 09:41:00 PM

 Jim Lee might have them. You can find him in the vendor section.

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: dagored on July 11, 2022, 09:45:29 PM

Thx Paul ...

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: Reptoid on July 11, 2022, 11:48:31 PM

Quote from: dagored on July 11, 2022, 09:26:16 PM

is there any one else than that guy ,  Shtterman on Ebay- ...???

https://www.ebay.com/itm/223467828720?hash=item3407b875f0:g:1DsAAOSw91teb-Gt

Title: Re: Venturi and needle valve assembly for OS LA .40 and FP .35
Post by: Steve Helmick on July 12, 2022, 05:41:12 PM

If it matters (it probably doesn't), as one who prefers the Randy Smith NV assy. over all others, and really doesn't care for the OS .35S type NV assy., I'd definitely vote for drilling the threads out of the case. Why? 1) The OS NV assy. has that danged clicker style ratchit bs that is a PITA to install. 2) The NV itself has an annoying failure mode when it is damaged (i.e., bent) and it LOOKS ok, but in fact is NG and won't give any logical adjustments. 3) WHEN you need to borrow a NV Assy. at the field (because yours went Tango Utah), the odds are better that you'll be able to find a .156" (4mm) unit.  y1 Steve